Applies to Portable 2 In 1 Steamer (XTY001)
1. Steam is not fully heated.
Heating up for about 60 then you can use the machine when indicator light always on.
2. Did not press the steam switch completely.
Press the steam switch completely.
3. Water level in the water tank is too low.
Unplug the power plug, and fill with some water.
4. The tank is not placed properly.
check if the watertank is inserted properly.
5. Hole for steam out is jammed by incrustation.
Mixing acid water by 1:10 into the tank, heat up for 60s and then acid water to clean the steam pipe.
6. Machine is placed upside down, thus no water can be suck up from the tank.
Make sure the machine is placed flatly.